🔥LAST DAY 50%🔥Car Anti-glare Visor For Day & Night
🔥LAST DAY 50%🔥Car Anti-glare Visor For Day & Night
Couldn't load pickup availability
🔥LAST DAY 50%🔥Car Anti-glare Visor For Day & Night
Clip-on car anti-glare visor
Low sun. Long drive.
Too much glare.
Add a tinted layer beneath your car's sun visor to help soften harsh daylight. A simple clip-on design for the bright stretches of your everyday drive.
For daytime use. Keep both tinted panels raised at dusk, at night, and in low light.
That awkward angle of sunlight
Your sun visor can only reach so far.
On the way to work or heading home before sunset, low sun can slip under the edge of your factory visor. Pulling an opaque visor farther down can also cover more of the road ahead.
This clip-on accessory adds a transparent, tinted panel below it, giving you another way to manage bright daylight.
A simple light-filtering design
Tinted panels. Adjustable placement.
Tint reduces the amount of light passing through the panel. The gray and yellow panels offer different tints, while the clip and hinge let you position the accessory to suit your setup.
A tinted layer
Designed to help soften bright daylight in the area covered by the panel.
Fold it up when needed
Raise the panels when lighting changes or when the tint is no longer useful. Adjust only while parked.
Tint also reduces light transmission and changes color appearance. It does not improve night vision or replace a clear, unobstructed view.
Made for everyday routines
From the morning commute to the weekend drive.
01 / Morning commute
Position the panel before leaving for work when low morning sun is on your route.
02 / Afternoon pickup
An extra tinted layer for bright stretches on the school run or afternoon errands.
03 / Weekend road trips
Keep a daylight accessory in place for longer drives. Take a safe stop before changing its position.
04 / Shared-car routines
The clip-on setup can be repositioned for another driver while parked. Check fit and sightlines each time.
What changes through the panel
A tinted view of the bright spot.
Daylight passing through the panel may feel less harsh. The view also becomes darker or changes color, so visibility must always come first.
Without the panel
Direct daylight reaches your view without this additional tinted layer.
Through the panel
Light is filtered within the covered area. Glare outside the panel remains.
Keep the setup simple
An add-on to your existing visor.
Factory visor alone
- Uses an opaque panel to block sunlight.
- Coverage follows its built-in size and movement.
- Lowering it covers part of the view.
With this clip-on accessory
- Adds a transparent tinted area below the visor.
- Attaches with a clip, without adhesive on the glass.
- Panels can be folded upward when not needed.
Set up before you drive
Clip. Position. Check.
-
Attach while parked
Secure the adjustable clip to your existing sun visor. Make sure it sits firmly without forcing the mount.
-
Position for daylight
Lower the gray panel and adjust its angle. Keep unused panels folded up.
-
Check your whole view
From your normal seat position, check the road, mirrors, and traffic signals. Raise or remove the accessory if anything is harder to see.
Visibility comes first
A few things to check before every drive.
- Daylight only: keep both tinted panels raised at dusk, at night, in tunnels, and in other low-light conditions.
- Adjust while parked: do not reach for the panels while the vehicle is moving.
- Keep sightlines clear: do not cover mirrors, traffic signals, pedestrians, or your view of the road.
- Check the clip: stop using the accessory if it shifts, vibrates loose, or cannot sit securely.
- Keep panels clear: gently remove dust with a clean, soft cloth. Stop using a scratched, cloudy, or damaged panel.
This accessory does not prevent crashes or correct vision problems. Follow your vehicle's instructions and local rules for windshield visibility.
Before you choose
A few practical answers.
Will it fit my car?
It uses an adjustable clip on the existing sun visor. Fit depends on your visor's thickness, shape, and available space. Check your setup before ordering; vehicle type alone does not confirm fit.
Which size should I choose?
The listed sizes are Small: 12.6 x 4.7 in (32 x 12 cm), and Large: 12.6 x 5.5 in (32 x 14 cm). Measure the available space and allow room for mirrors and a clear view.
Can I use the yellow panel at night?
Keep both tinted panels raised at night and in low light. A yellow tint should not be treated as a night-vision aid or proof of safer night driving.
Do I need to stick anything to the windshield?
No. The accessory attaches to your existing sun visor with its clip, rather than adhesive on the glass.
What comes in the package?
One clip-on car visor accessory with gray and yellow panels, in the size you select.
A simple addition for sunny drives
Make room for a little more shade.
Two tinted panels. An adjustable clip. A fold-up design.
Choose the size that suits your visor and available space.
Return to the purchase options above.
